Keeping a pool clean is no easy task. Even with regular cleaning, you will still need to invest in an additional piece of equipment to keep it ready regularly. A vacuum hose is one of the most useful pieces of equipment that you can buy for your pool.
This device allows you to suck up leaves, twigs, and other debris directly from the water surface. It’s also much easier than removing leaves by skimming them off with any other device.
In this article, we are going to show you how to set up pool vacuum hose so that you can enjoy your swimming experience.
What is a Pool Vacuum Hose?
A pool vacuum hose is a specialized hose that will connect to your existing filtration system. This will create a suction that will “vacuum” debris from the pool water.
This is different from a standard pool hose, as it will have air-powered suction that is created by the filtration system.
Pool vacuum hoses are available in several diameters. Although a common size is 1-1/2 inches, it can pull an impressive amount of water through the hose. If you have a larger pool, you may want to consider a larger diameter hose.
How to choose pool vacuum hose
Pool vacuum hoses vary in length, material, and even size. However, the first thing that you will want to consider is the length of the hose.
When choosing a pool vacuum hose, it is important that it is long enough so that it can reach all areas of your pool.
The next thing that you will want to consider when purchasing a pool vacuum hose is what material it is made out of.
There are different materials that you can pick from when it comes to the best hose for your needs, including vinyl, rubber, and fabric.
Each of these materials is made up of a few different components and all offer their own unique benefits. When choosing a pool vacuum hose material, it is important to make sure that the material chosen does not become brittle or break easily when exposed.
How to Set Up Pool Vacuum Hose
When you get a new vacuum hose, you need to go through a quick setup process to make sure that it is ready to use.
First, make sure that you have the right connection for your filtration system.
The hose typically has a standard connection that will fit on your skimmer basket or filter system. If you have a sand filter, there may be a special connector for this system.
Next, turn the filtration system on and see if the suction is strong. If not, check to make sure it is hooked up to the correct place on the system.
Now, you need to open the filter system and let air into the hose until there is a steady flow of water coming out of the vacuum hose.
This is necessary to create the correct suction inside the hose.
How to Use a Pool Vacuum Hose
After learning how to set up pool vacuum hose, simply attach it to the filtration system and turn on the pump (learn also about how to set a pool timer). Make sure that you don’t get too close to the water while using the vacuum hose.
The suction can be powerful and can pull you in if you get too close. While you can use the vacuum hose to remove larger debris right away, it is not a good idea to use it to clean up smaller particles like sand.
They can clog the hose. It is better to use a skimmer net or other device to get rid of the sand before using the vacuum hose.
Tips for Using a Pool Vacuum Hose
Choose the right diameter
There are plenty of options when it comes to choosing a vacuum hose for your pool. You will want to select one that is large enough to provide sufficient suction but not so big that it clogs up easily.
If you have a larger pool, you may want to choose a larger diameter hose.
Keep it out of the sun.
The hose will be under a lot of pressure during use. To prevent this from happening, try to keep the hose out of the sun so that it doesn’t become brittle.
Don’t use it with a skimmer
You should never use a vacuum hose with a skimmer. The suction will be too strong, and it can cause the skimmer to malfunction or even break.
The Bottom Line
A vacuum hose is a great tool for keeping your pool clean and tidy. You can use it to suck up large debris from the surface, and it is a lot safer than trying to remove them by skimming them off.
Setting up a pool vacuum hose is quite easy, and when used correctly, it can be very helpful.
