Algae is a common source of concern for pool cleaners. Algae are a kingdom of Protista that are mostly watery photosynthetic organisms. Your pool may have algae. This is caused by low chlorine levels, inadequate water filtration, or poor filtering. You may not want to leave it for too long since algae may spread quickly and make the removal more difficult. This post will show you how to vacuum algae out of pool properly.
The various forms of algae
Before you can remove it, you must first understand the many types of pool algae. This will assist you in treating it based on the sorts. You must determine the color of the algae in your pool. The color of algae comes in several kinds, including teal green, dark green, and black green. The dark green algae are the most difficult to kill, whereas the teal green algae are the simplest.
Algae in green pools
This is the common algae that are quite easy to destroy. However, this green algae may grow quickly and obscure the water in your pool. It can cause green slime to form on your pool’s surfaces. You must clean and scrub your pool before shocking and filtering the water to get rid of this algae.
Algae in yellow pools
This one is less common than the green one. These algae thrive in humid environments. This might resemble sand clinging to the shaded edges of your pool. Unfortunately, this species of algae is resistant to chlorine. To remove the yellow pool algae, you will need numerous cleaning sessions, including brushing and shocking.
Algae in black pools
The algae in the black pool indicate that there are bacteria in this algae. These algae are the most difficult to eliminate. You are required to conduct several intensive and deep cleaning. Additionally, these algae will also swiftly regrow.
How to vacuum algae out of pool?
You can vacuum away the different varieties of algae now that you know their types. Afterward, you have two options on how to vacuum algae out of pool.
The waste technique
This is the simplest way to get rid of the dead algae at the pool’s bottom. To begin, bypass the filter and suction the pool to the waste. Keep in mind that this will only work if your cartridge filter has a multiport system or a waste line system. The trash and algae will then be removed from your pool by vacuuming it into the garbage. Nevertheless, you must stop the operation when the water level falls below 6 inches. Before starting the procedure again, you must turn off the waste system first and add more water.
The filtering technique
This is the other option. You need to prepare an old cartridge to dispose of once the algae have been cleaned. The vacuuming procedure is nearly similar. Next, you have to check and see whether the dead algae or dirt is returning to the pool. If this happens, clean the cartridge before restarting the vacuuming procedure. After the algae have been removed, the pool must be refilled with water as you want to use it. If you have a multiport valve, though, you’ll need to restart the pool system in phases to prevent the algae from returning to your clean pool.
Tips to vacuum algae out of your pool
After you’ve decided on the ideal way for cleaning your pool of algae, below are some of the most widely followed advice:
- Backwashing and rinsing the filter system
- Check the water discharged 3 times
- Make sure there are no air bubbles
- Remove the old cartridge filter element
- Add 1 gallon of bleach + 1/2 gallon of acid
- Wait for 24 hours before using
Final thoughts
These suggestions are sure to get rid of any dead algae in the pool. However, if you are still unsure about how to treat the algae in your pool, you should seek expert assistance. This may also prevent you from damaging your own pool. The professional may have knowledge of how to vacuum algae out of pool accurately, efficiently, and effectively. Vacuuming algae out of your pool may be challenging. Initially, you need to observe the algae types, prepare the materials and equipment, and implement the right method to prevent them from keeping growing in the pool.
