Cleaning the swimming pool is frequently associated with the pool’s equipment. A pool pump and a filter are two common pieces of pool technology. Pool pumps are in charge of circulating the pool water, whilst pool filters are in charge of removing debris, materials, or contaminants from the pool. The question that many are still concerned about when it comes to vacuuming the pool is, what setting should my pool pump be on to vacuum?
A pool vacuum is required to remove dirt and sediment from the pool bottom and walls. The vacuum hose connects to an intake at the bottom of a skimmer and redirects pump suction to the vacuum head. The vacuum will take the debris and draw it through the skimmer and return it to the pump. Before vacuuming or cleaning the pool, some preparations must be done, including setting up the right sets of the pool pump and filter.
What normally do you need to adjust before vacuuming?
Before vacuuming, you should usually adjust the filter system as well as valve settings. Here are some things you should pay closer attention to.
The filter systems
There are several sorts of filter systems, such as sand filters and cartridge filters. If you are using a sand filter, you need to change the filter’s setting to waste for bigger cleanups. If you are utilizing a cartridge filter, however, you must put your focus on the pool valves.
The pool valves
Your pool will mostly have two primary valves: the main drain and the skimmer. The main drain is generally installed at the pool’s bottom, whilst a skimmer is typically put at the pool’s top to skim surface water and take floating trash out of the water. While vacuuming, keep the main drain valve closed and put your attention on the skimmer. If the skimmer is too powerful, you can partially open the main drain.
What setting should my pool pump be on to vacuum?
The pool pump is said to be the “heart” of the swimming pool circulation system. As a result, the pool pump is important for water circulation. The pool pump is also useful for cleaning. It assists the vacuum in pulling water via the skimmer and the drain, pushing it into the filter, and bringing it to the pool using the main returns. The pool pump is in control of the overall pool operation. So, “What setting should my pool pump be on to vacuum?” Logically, you should set the pool pump to the highest setting so that it can create adequate suction for your vacuum. However, if you do not have any pressure level settings, you must just leave it as it is.
When is the ideal time to operate the pump?
Essentially, to determine the ideal time to activate the pump. You must weigh the cost of energy against the chemical demand. While it is probably best to operate the pump during the day since the UV can assist in removing the chlorine, and chlorine addition needs the operation of the pump, the cost is higher during the day and lower at night. Thus, after you have determined the best time to operate the pump, you may plan the cleaning schedule.
When is the optimal duration to operate the pump?
There are also two major considerations to remember when determining how long the pump should operate throughout each cycle. The two elements are chemical demand and filtration. The chemical need is at its maximum during the summer months as the volume of waste is equally significant. As a result, filtering must be performed on a frequent basis during this season. This indicates that the pump should be running for at least 12 hours every day. During the winter, the duration intensity can be reduced to 4-5 hours each day.
Summary
To answer, “What setting should my pool pump be on to vacuum?”, if you have specific settings, you must set your pool pump to the highest pressure. When determining the best time and duration for the pool pump to be on or off, consider several factors such as chemical need, power cost, and filtration need. As a result, you will have a well-planned cleaning procedure for your pool.
